This is a very easy process that should take about half an hour.

You will need:

  • Scotch/Packing Tape
  • Duct/Gaff Tape
  • A can or bucket
  • Scissors

Step-by-step guide to making your very own Trash Can Taiko drum:

1. Tape around the rim of your garbage can with duct tape so that your packing tape has something to adhere securely to.

2. Pull out a strip of packing tape that can fit across the opening of your garbage can, leaving a few extra inches on both ends that can be taped to the rim for extra security.

3. Stretch the strip of tape out across the middle of the opening, making sure to pull it tight, but not TOO tight.

Taiko step 3

4. Pull out another strip of about the same length, and stretch this strip over the lid in the same way but in the opposite direction. The goal is to make the two strips of tape look like a cross or a plus sign.

Taiko step 4

5. Do the same thing with two more strips of tape, but go across the middle in diagonal directions. With all four strips of tape in place, it should look like a star.

Taiko Step 5ATaiko Step 5B

6. Now that you have your tape star, pull out another strip of tape of the same length as the previous ones and just barely cross it in front of your first strip of tape.

Taiko Step 6

7. Continue putting strips of tape across the middle of the garbage can opening, going in a clockwise direction until the entire opening is covered in tape.

8. For the second layer of tape, youโ€™re going to layer the strips across the opening of your garbage can in horizontal rows until the entire first layer of tape is completely covered. Make sure that the tape covers half of the previous layer of tape.

Taiko Step 8

9. Similarly, the third layer of tape will go in vertical rows until the second layer of tape is completely covered. Make sure that the tape covers half of the previous layer of tape.

Taiko Step 9

10. Once you have three layers of tape, line the outside rim of the garbage can with duct tape to make sure the packing tape ends lie flat against the can.

11. When this step is complete, you can repeat steps 1-9 for a REALLY secure taiko drum skin, or leave it as is and start drumming away!

And there you have it! Your very own Taiko drum to practice with at home. Happy Drumming!

Keep in mind that if youโ€™re beating your drum nice and hard, the tape might rip, but thatโ€™s okay! It happens at Team Taiko too. All you have to do is put three tight layers of tape over the hole as a patch and youโ€™re good to keep going.